Tine Cultivators

Swift

High capacity – low draught requirement

Swift is a trailed tine cultivator, designed to perform at peak level in both wet and dry years. The models in the product family span from 4 to 8.7 metre working width.

Cultus

Intensive cultivation

The 3-4m tine cultivator Cultus 300-400 has powerful tines working down to 25cm depth. You benefit from a spacious frame construction offering impressive mixing capabilities.

Opus

Power and versatility

The trailed powerful tine cultivator Opus 400-700 is designed to create an intense mixing and loosening down to 30cm working depth. Opus is a powerful and versatile tine cultivator…

Combination Cultivator

TopDown

TopDown 300-900 is a high intensity multipurpose cultivator, performing both a full-scale shallow cultivation and a deep cultivation in one single pass.

By adapting the working result to different conditions in the field, TopDown is a highly versatile multipurpose cultivator with an unmatched performance.

Disc Cultivator

Carrier 300-400

Carrier 300-400 is a rigid disc cultivator, available in 3, 3.5 and 4 metre working widths. Depending on configuration, the machine can be delivered either as a mounted or trailed version.

Carrier 300-400 mixes in residues, and leaves a perfectly levelled working result. The frame provides a stable and durable machine that sits very close to the tractor, saving on front ballast and reducing the compaction risk.

Carrier X 425-625

Carrier X 425-625 is a mounted foldable disc cultivator with discs positioned in an x-shape, available in 4.25, 5.25 or 6.25 metre working width. It can be fitted with 450 or 470mm diameter discs.

It has excellent contour following and impressive penetration ability for its weight. The working depth is set from the tractor cab, enabling adaptation to varying conditions in the field.

Carrier 420-820

Carrier 420-820 is a trailed disc cultivator, available in working widths between 4.2 and 8.2 metres. It can be fitted with 450 or 470mm discs.

Whether you require a stale seedbed, levelling of ploughed land or cover crop incorporation, the wide range of front tools offer versatility to different farming requirements.

Carrier 925-1225

Carrier is a disc cultivator used for high speed primary tillage and seedbed preparation. The wide range of front tools, discs and packers enables Carrier to handle the versatile challenges of modern farming – from ultra-shallow cultivation to a deeper incorporation. The versatility it brings to the farm saves passes, decreases machine cost per hectare and provides the best start possible for the coming crop.

Carrier XL 425-625

Carrier XL 425-625 is a trailed disc cultivator, available in working widths between 4.25 to 6.25m. It can be fitted with 510 or 610mm discs, with adjustable disc angles.

The sizes of the discs make Carrier XL 425-625 well suited for deeper cultivation, incorporating large amounts of crop residues or breaking up pasture. A wide range of front tools increases the versatility of the machine.

Carrier XL 925-1225

Carrier XL 925-1225 is a trailed disc cultivator, available with 9.25 or 12.25m working width. It can be fitted with 510 or 610mm discs. The sizes of the discs make them well suited to incorporate large amounts of crop residues even at depth. The disc angle can be adjusted according to working depth. With a high working speed, it has a working capacity of up to 16 hectares per hour. This lowers the capital costs per hectare to minimum.

Tine Harrows

NZ Mounted

Seedbed preparation with high precision

NZ Mounted is a mounted tine harrow available in 4 or 5 metre working width. Thanks to its ingenious drawbar, NZ Mounted is able to move independently from the tractor, thereby…

NZ Aggressive

NZ Aggressive 500-1000 is a seedbed tine harrow, available in working widths from 5 to 10 metres. It has a levelling CrossBoard followed by tines with 7.5cm spacing, distributed across 5 or 6 axles. The highly intensive cultivation saves passes whilst retaining ground moisture. You benefit from a high carrying capacity, giving a constant working depth and enabling early entry into the field.

Ferrox

The light cultivator Ferox 500-900 is equipped with 6 axles and vibrating tines working down to 12cm.

Ferox is a high quality universal tool for medium deep tillage and seedbed preparation.

Rollers

Rollex

Rollex 450-620 is a roller, available in 4.5, 5.0 or 6.2 metre working width. By combining versatility with high quality and productivity, Rollex has become a popular concept.

Rexius

Rexius 500-1230 is a heavy-duty roller, available in six different models from 5.0 to 12.3 metre working width. Rexius has a heavy-duty construction, resulting in a long working life and minimal downtime on the field.

Press

RexiusTwin

RexiusTwin is the heaviest press on the market, available in working widths from 4.5 to 10.3 metres. It offers impressive results in both the heaviest and lightest soils.

Rapid Seed Drills

Rapid 300-400 cs

Rapid is a seed drill that carries out seedbed preparation, levelling, drilling and reconsolidation in one pass. It offers a reliable seeding result at high working speed. The simplicity in construction, paired with a high machine quality ensures a long working life and low operating costs. Direct drilling, reduced tillage or conventional tillage – Rapid creates perfect seeding results in all conditions

Rapid A 400-800S

Rapid is a seed drill that carries out seedbed preparation, levelling, drilling and reconsolidation in one pass. It offers a reliable seeding result at high working speed. The simplicity in construction, paired with a high machine quality ensures a long working life and low operating costs. Direct drilling, reduced tillage or conventional tillage – Rapid creates perfect seeding results in all conditions.

Rapid A 600-800C/J

Rapid is a seed drill that carries out seedbed preparation, levelling, drilling and reconsolidation in one pass. It offers a reliable seeding result at high working speed. The simplicity in construction, paired with a high machine quality ensures a long working life and low operating costs. Direct drilling, reduced tillage or conventional tillage – Rapid creates perfect seeding results in all conditions.

Spirit Seed Drills

Spirit R 300S

The pneumatic seed drill Spirit carries out levelling, seedbed preparation, reconsolidation, seeding and pressing in one pass. It is known to provide impressive precision at high working speeds on the field. Thanks to the individual row depth control, Spirit always places the seed at the intended seeding depth. You benefit from an even emergence over the entire field.

Spirit 400C/S

The pneumatic seed drill Spirit carries out levelling, seedbed preparation, reconsolidation, seeding and pressing in one pass. It is known to provide impressive precision at high working speeds on the field. Thanks to the individual row depth control, Spirit always places the seed at the intended seeding depth. You benefit from an even emergence over the entire field.

Spirit 600-900S

The pneumatic seed drill Spirit 600-900S is available in 6, 8 or 9 metre working widths.

It is a universal seed drill for high capacity drilling in conventional and minimum tillage.

Spirit 600-900C

Spirit 600-900C is a pneumatic seed drill for both seed and fertiliser, available in 6, 8 or 9 metre working widths.

The 5000 litre hopper with large opening, result in fewer fills. Both the fertiliser and seed metering have impressive capacity.

Mountable Small Seeders

BioDrill

BioDrill is a mountable small seeder that can be fitted on Väderstad cultivators and seed drills, further improving the machine’s versatility.

BioDrill is equipped with a precise radar controlled metering system, ensuring an even distribution over the entire working width. This accuracy is fully measurable to a full-scale seed drill, important when drilling low seed rates or cover crop mixtures with varying seed sizes.

Tempo Planter

Tempo R 4-6

Tempo R 4-6 is a mounted high-speed planter available with 4 or 6 row units, and fertiliser metering as option.

With easily adjustable row spacing, it is possible to plant numerous crops with the same machine, enabling greater usage.

Tempo T 6-7

Tempo T is a mounted high-speed planter available with 6 or 7 row units, and fertiliser metering as an option.

With easily adjustable row spacing, it is possible to plant numerous crops with the same machine, enabling greater usage.

Tempo F 6-8

Tempo F is a trailed high-speed planter, available with 6 or 8 row units and fertiliser application as an option.

The placement and design of the support wheels maintain the seed depth in all conditions which ensures an even crop.

Tempo V 6-12

The mounted high-speed planter Tempo V is available with 6 to 12 row units, including odd numbers.

The ability to use the same machine for multiple crops often means that two traditional planters can be replaced. This increases usage and lower the hectare costs.

Tempo L 12-24

Tempo L is a trailed high-speed planter with an enormous capacity, available with 12, 16, 18 or 24 row units. Tempo L doubles the capacity of a traditional planter. Most importantly, the crop is established with higher precision. Tempo L sets a new standard for high capacity planting.

Tempo R 12-18

Tempo R 12-18 is a rigid, mounted high-speed planter available with 12 or 18 row units, and fertiliser metering as an option. With easily adjustable row spacing, it is possible to plant numerous crops with the same machine, enabling greater usage. The three-point linkage provides excellent manoeuvrability and short headlands, Additionally, a rigid frame benefits from fewer moving parts, minimal weight and reduced maintenance without compromising the excellent precision Tempo R offers.

Front Hopper

FH 2200

The front-mounted fertiliser hopper FH 2200 enables high precision combi-drilling. The 2200 litre hopper is equipped with the electric Fenix III metering system and is suitable for large capacity and high working speeds on the field.

FH 2200 thereby delivers a measure of fertiliser distribution that takes full advantage of the capacity of the Tempo planter.